Franklin Electric 4 Inch Submersible Bore ...
Our Franklin range of submersible bore pumps are available for delivery Australia wide.
4” inch bore pumps come in 2-wire single 1 phase, 3-wire single 1 phase, 3W-PSC single 1 phase and three 3 phase.
4” bore pumps 2.2kw / 3hp and above have high thrust motors.
The 2-wire motor does not need a starter box. The 3-wire and 3W-PSC require a starter box. These come standard when you order a bore pump. A bore pump consists of a pump wet end, a submersible motor and starter box (if required).
Note: the 3 phase models do not include a starter box / contactor. However, they are available for purchase.
The standard FPS 4400 4" submersible pump features the new TRI-SEAL floating stage system. This design allows the impellers to float independently which improves efficiency and protects against wear when pumping abrasives like sand. This feature is in the 1 m³/h (18LPM), 1.5 m³/h (25LPM), 2 m³/h (30LPM), 3 m³/h (45LPM), 3.5 m³/h (60LPM) and 4 m³/h (70LPM) flow rating pumps.
Standard Franklin bore pumps are made of 304 stainless steel with 304 stainless steel motors. 316 stainless steel motors are available on request when using the pump in brackish water or water that has more salinity than fresh water.
Hi Temp motors are also available on some 1.5kw,2.2kw, 3.7kw and 5.5kw models if needed.
All motors are supplied fitted with leads. The 0.37kw to 1.5kw motors have 1.5m leads and the 2.2kw and above are fitted with 2.5m leads.
You will also receive a free splice kit with every Franklin bore pump to join the lead to your electrical cable. The correct size electrical cable should be selected by your electrician.
All Franklin bore pumps on the Strongman Pumps website are delivered free of charge Australia wide.
Please go to www.StrongmanPumps.com.au to purchase a Franklin Electric submersible bore pump online.
To contact Strongman Pumps about Franklin Electric 4 Inch Submersible Bore Pumps use Get a quote.
Our Franklin range of submersible bore pumps are available for delivery Australia wide.
4” inch bore pumps come in 2-wire single 1 phase, 3-wire single 1 phase, 3W-PSC single 1 phase and three 3 phase.
4” bore pumps 2.2kw / 3hp and above have high thrust motors.
The 2-wire motor does not need a starter box. The 3-wire and 3W-PSC require a starter box. These come standard when you order a bore pump. A bore pump consists of a pump wet end, a submersible motor and starter box (if required).
Note: the 3 phase models do not include a starter box / contactor. However, they are available for purchase.
The standard FPS 4400 4" submersible pump features the new TRI-SEAL floating stage system. This design allows the impellers to float independently which improves efficiency and protects against wear when pumping abrasives like sand. This feature is in the 1 m³/h (18LPM), 1.5 m³/h (25LPM), 2 m³/h (30LPM), 3 m³/h (45LPM), 3.5 m³/h (60LPM) and 4 m³/h (70LPM) flow rating pumps.
Standard Franklin bore pumps are made of 304 stainless steel with 304 stainless steel motors. 316 stainless steel motors are available on request when using the pump in brackish water or water that has more salinity than fresh water.
Hi Temp motors are also available on some 1.5kw,2.2kw, 3.7kw and 5.5kw models if needed.
All motors are supplied fitted with leads. The 0.37kw to 1.5kw motors have 1.5m leads and the 2.2kw and above are fitted with 2.5m leads.
You will also receive a free splice kit with every Franklin bore pump to join the lead to your electrical cable. The correct size electrical cable should be selected by your electrician.
All Franklin bore pumps on the Strongman Pumps website are delivered free of charge Australia wide.
Please go to www.StrongmanPumps.com.au to purchase a Franklin Electric submersible bore pump online.
To contact Strongman Pumps about Franklin Electric 4 Inch Submersible Bore Pumps use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product